Alimentation haute tension de laboratoire de haute précision
Obtenir le dernier prixType de paiement: | T/T |
Incoterm: | FOB,CFR,CIF,EXW |
Quantité de commande minimum: | 1 Piece/Pieces |
transport: | Ocean,Land,Air,Express |
Hafen: | SHANGHAI,NANJING,QINGDAO |
Type de paiement: | T/T |
Incoterm: | FOB,CFR,CIF,EXW |
Quantité de commande minimum: | 1 Piece/Pieces |
transport: | Ocean,Land,Air,Express |
Hafen: | SHANGHAI,NANJING,QINGDAO |
Modèle: LTP
marque: IDEALTEKNIC
Lieu D'origine: Chine
Puissance De Sortie: > 500 W
Le Type De Sortie: Seul
Input Voltage: Single Phase 220vac
Input Frequency: 50/60hz
Working Principle: Pwm
Power Supply Type: Igbt-Based
Working Mode: Constant Voltage / Constant Current
Display Mode: Digital Led
Control Mode: 10-Turn Potentometers
Protections: Ovp, Ocp, Short Circuit And Load Discharing Protections.
Applications: Lab / Education / Calibration / Electrostatic / Electrostatic / Electrospinning.
Cooling: Forced Air Cooling
Unités de vente | : | Piece/Pieces |
Type de colis | : | Caisse en contreplaqué |
Exemple d’image | : | |
Télécharger | : |
Alimentation CC de test haute tension série LTP
Aperçu
Les alimentations haute tension de laboratoire de la série LTP sont des alimentations haute tension spécialement conçues pour les applications de laboratoire haute tension. Il adopte un châssis standard 2U de 19 pouces avec une puissance de sortie conçue de 1KW et une plage de tension de sortie de 1KV à 60KV.
Les alimentations haute tension de laboratoire de la série LTP sont des alimentations haute tension à tension constante et à courant constant. La tension et le courant de sortie peuvent être ajustés en continu de 0 à la valeur nominale via le potentiomètre de commande sur le panneau avant, et l'affichage de la sortie se fait via des LED KV et mA haute résolution. Les alimentations de laboratoire haute tension sont également équipées d'une interface DB9 en standard, et des signaux 0-10 V et des signaux de contact sec peuvent être appliqués à l'interface pour assurer le contrôle et la surveillance de l'alimentation.
Ces alimentations haute tension de laboratoire de série ont des caractéristiques de sortie de haute précision, de stabilité élevée et de faible ondulation. La stabilité et l'ondulation peuvent atteindre le niveau de 0,1%. Dans le même temps, l'alimentation est équipée de fonctions de protection complètes pour faire face aux étincelles, aux courts-circuits, aux surcharges et aux conditions de décharge de charges.
À l'heure actuelle, les alimentations électriques haute tension de laboratoire sont principalement utilisées pour les bancs d'essai haute tension de laboratoire, l'électrostatique, les tests d'isolement et les applications d'électrophorèse.
Caractéristiques
je Modes de travail CV/CC.
je Tension et courant de sortie réglables de 0 à 100%
je Sortie HV stable et à faible ondulation.
je Affichage des compteurs numériques à LED à 4 chiffres.
je Fonctions de protection parfaites et complètes
je Structure compacte, petite taille et poids léger.
Précautions de sécurité
1. Ce module d'alimentation a une sortie HV, seule une personne professionnelle peut l'utiliser.
2. Veuillez vous assurer d'une bonne mise à la terre avant l'utilisation.
3. L'alimentation de charge du condensateur a une faible énergie stockée en interne, veuillez ne pas fonctionner sans charge.
4. Gardez le module d'alimentation propre et une bonne ventilation.
5. Les connecteurs d'entrée et de sortie HV ou la charge HV ne touchent rien.
Input |
Voltage |
Single-phase 220V±10% |
|
Frequency |
50Hz/60Hz |
||
Connection |
Input line provided by iDealTek. (1 meter) |
||
Output |
Rated power |
****W |
|
Output voltage adjusting range |
1KV/2KV/3KV/4KV5KV/10KV/20KV/30KV/40KV/50KV/60KV available ** (For other output voltages, please contact us for details) |
||
Output current adjusting range |
0A ~ ****mA |
||
Output polarity |
Positive or Negative (both available) Client must choose one output polarity before ordering. |
||
Line regulation |
0.1% for ±10% change in input voltage. |
||
Load regulation |
0.1% for no load to full load at output. |
||
Ripple (Vr.m.s.) |
≤0.1%@ rated output. |
||
Output connection |
1.5 meters high-voltage cable & connector provided by IdealTek. |
||
Efficiency |
≥85% |
||
Setting & Display |
Output control mode |
Local |
10-turn potentiometer on front panel. |
Remote |
DB9 analog port & RS485 communication port. |
||
Display mode |
Display mode |
41/2 LED digital display |
|
Display resolution |
≤1% (range: 5%~100% of the rated value) |
||
Protection & Monitoring functions |
Load discharging protection |
When the load has discharging due to insufficient safety distance between load and ground, the power supply shutdown the high voltage output, and then restarts, so cycle like this till the discharging fault is eliminated. |
|
Short circuit protection |
When a short circuit occurs between the load and the ground, the power supply works in constant current mode, the current is limited to the maximum value, and the voltage drops to 0 to protect the internal inverter from damage. |
||
Over current protection |
When the users' load exceeds the rated load and cause over-loading, the power supply works in constant current mode, the power supply output current does not change, and output voltage decreases. |
||
Over voltage protection |
When the power supply is unloaded, the power supply works in constant voltage mode to prevent power supply from overvoltage damage. |
||
Noise |
≤55dB |
||
Protection degree |
IP20 |
||
Cooling method |
Forced air cooling |
||
MTBF |
50000 hours @ 25℃ |
||
Working environment conditions |
Ambient temperature |
10℃~40℃ |
|
Humidity |
10%~90%(non-condensing) |
||
Height |
≤2000m |
||
Storage environment conditions |
Ambient temperature |
-20℃~60℃ |
|
Humidity |
10%~90%(non-condensing) |
||
Height |
≤2000m |
||
Size (W*H*D) (mm) |
200*100*300 (≤30W) 500*88*600 (19’’ 2U standard chassis) (>30W) |
||
|
200 * 100 * 300 (≤30W) (noir) |
2U Châssis (> 30W) (RAL7035) |
K V | mâle | P (KW) | Modèle |
1 | 1000 | 1 | LTP-220VAC- (N / P) 1KW-1KV |
2 | 500 | 1 | LTP-220VAC- (N / P) 1KW-2KV |
3 | 333 | 1 | LTP-220VAC- (N / P) 1KW-3KV |
4 | 250 | 1 | LTP-220VAC- (N / P) 1KW-4KV |
5 | 200 | 1 | LTP-220VAC- (N / P) 1KW-5KV |
dix | 100 | 1 | LTP-220VAC- (N / P) 1KW-10KV |
20 | 50 | 1 | LTP-220VAC- (N / P) 1KW-20KV |
30 | 33.3 | 1 | LTP-220VAC- (N / P) 1KW-30KV |
40 | 25 | 1 | LTP-220VAC- (N / P) 1KW-40KV |
l 0 ~ 10V Contrôle du signal analogique (interface DB standard) (+ AC)
l Interface de communication RS (RS232 / RS485 Facultatif) (+ RC)Dessins |
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.